//

ANALISA PENERAPAN KESELAMATAN DAN KESEHATAN KERJA (K3)TAMBANG BAWAH TANAH DI TAMBANG TRADISIONAL GEUMPANG KABUPATEN PIDIE, ACEH

BACA FULL TEXT ABSTRAK Pemesanan Versi cetak
Pengarang Ajrina Zahirah - Personal Name
SubjectOCCUPATIONAL HEALTH
OCCOPATIONAL HEALTH AND SAFETY
OCCUPATIONAL SAFETY
Bahasa Indonesia
Fakultas FAKULTAS TEKNIK UNIVERSITAS SYIAH KUALA
Tahun Terbit 2017

Abstrak/Catatan

The safety and occupational health standards in mining in general have been set based on the Ministerial Decree of the Minister of Minerals and Energy No. 555K/26/MPE/1995. However artisanal mining in Geumpang has not yet fully implemented the standard. It results many problems, for example mining accidents. The purpose of this research is to identify the applicability of safety and occupational health based on Ministerial Decree of the Minister of Mineral and Energy No. 555. K/26/URM.PE/1995. Area of research is on artisanal mines Geumpang, Pidie, KM 12. The mining method used is Gophering Method. The application of Safety and Occupational Health (SOH), Good Mining Practice, Management System of Mining Safety (MSMS) and Management System of Safety and Occupational Health (MSSHO) which are not fully applied result accidents in the mining location. The results of this research conduded that the worker only apply approximately 5% of the overall rules writen in the Ministerial Decree of the Minister of mines and energy No. 555. K/26/URM.PE/1995. The results of the analysis in the field found that the workers are highly susceptible to accidents given the management of traditional mines KM 12 Geumpang has not been in accordance with the applicable standard. Therefore the recommendation for reducing the risk of accidents and improve safety for workers are to provide more incentive supervision and training from respective government agencies. Keywords : Artisanal Mining, Safety and Occupational Health (SHO), Gophering Method, Ministerial Decree of the Minister of Minerals and Energy No.555K/26/MPE/1995

Tempat Terbit Banda Aceh
Literature Searching Service

Hard copy atau foto copy dari buku ini dapat diberikan dengan syarat ketentuan berlaku, jika berminat, silahkan hubungi via telegram (Chat Services LSS)

Share Social Media

Tulisan yang Relevan

ANALISIS KESELAMATAN PEKERJAAN MELALUI METODE JOB SAFETY ANALYSIS PADA KEGIATAN TAMBANG TRADISIONAL GUNONG UJEUN – ACEH JAYA (Misbahani, 2018)

PENGARUH PENGETAHUAN KESELAMATAN DAN KESEHATAN KERJA TERHADAP PERILAKU PEKERJA PROYEK INFRASTRUKTUR JALAN TOL BANDA ACEH - SIGLI (HANNI HUSEN, 2021)

ANALISIS POTENSI BAHAYA MENGGUNAKAN METODE JOB SAFETY ANALYSIS UNTUK MENCEGAH KECELAKAAN KERJA DI TAMBANG EMAS GEUMPANG (Cut Ana Eliza, 2017)

SISTEM TATA KELOLA KANTOR PT. CIPTA KRIDATAMA SITE MIFA PROYEK MEULABOH UNTUK MEMASTIKAN TERJAGANYA ASPEK KESELAMATAN, KESEHATAN DAN LINGKUNGAN KERJA (Nur Aisah, 2014)

KONSEP KESELAMATAN KERJA DALAM PERSPEKTIF PERATURAN PERUNDANG-UNDANGAN DI INDONESIA (YASSIR ARAFAT, 2019)

  Kembali ke sebelumnya

Pencarian

Advance



Jenis Akses


Tahun Terbit

   

Program Studi

   

© UPT. Perpustakaan Universitas Syiah Kuala 2015     |     Privacy Policy